Fixture Shield Home Ceramic Coating for Faucets & Shower Glass
Fixture Shield Home Ceramic Coating for Faucets & Shower Glass
Made-in-USA SiO₂ ceramic protection for compatible faucets, shower glass, stainless steel and countertops. Up to 12 months with proper application and care.
Couldn't load pickup availability
- SiO₂ ceramic protection helps repel water and resist everyday residue.
- Up to 12 months with proper preparation, application and care.
- 8 oz coating kit + microfiber towel. Labeled for up to 1,000 sq. ft.
- Made in the USA. Simple spray, spread and buff application.
Give the surfaces you keep wiping a protective layer. Fixture Shield Home Ceramic Coating is a DIY treatment for compatible kitchen and bathroom surfaces, including faucets, shower glass and stainless steel. Its water-repellent finish helps reduce residue buildup and makes routine cleaning easier.
Clean first. Coat next. Keep caring for the surface. Home Ceramic Coating is applied to a clean surface. For everyday cleaning, explore our separate Surface Revive cleaner.
One coating for everyday kitchen and bathroom surfaces
- Shower glass: add a water-repellent layer to clean shower doors and panels to help make soap residue and water spots easier to manage.
- Faucets and shower trim: help simplify wiping on compatible exterior finishes exposed to splashes and daily handling.
- Stainless steel: help reduce the effort of removing everyday smudges and residue from compatible appliances and fixtures.
Check the surface manufacturer's care instructions and test an inconspicuous area before treating the entire surface, especially on decorative or factory-treated finishes.
SiO₂ protection for easier everyday care
Fixture Shield uses SiO2 ceramic technology to form an invisible protective layer. Water repellency can help with upkeep, but minerals can still leave spots when water dries. Continue gentle cleaning and remove standing droplets when practical.
Protection can last up to 12 months with proper application and care. Actual life varies with the surface, water exposure and cleaning routine. A coating does not repair scratches, peeling finishes or permanently etched glass.
Simple DIY application
- Clean the surface with a compatible cleaner, remove residue and dry it.
- Apply a fine mist and spread evenly with a clean microfiber towel, following the bottle directions.
- Buff away excess coating with a clean, dry section of the towel.
- Allow the coating to cure. Our current instructions specify 2 hours before use and 24 hours for full cure. Follow the directions supplied with your bottle.
Choose your surface guide
See our guides to ceramic coating for shower glass, ceramic coating for faucets and matte black faucet care. For the rest of the kitchen, explore ceramic coating for countertops and stainless steel appliance care.
Stainless steel appliances
Keep the stainless. Lose the constant fuss.
Refrigerator doors, dishwasher fronts, range hoods and cool oven exteriors. A clear routine for the surfaces you touch every day.
01 / Stainless steel
Help keep the showroom look.
Home Ceramic Coating helps resist fingerprints and water spotting on compatible stainless steel. Surface Revive removes everyday fingerprints and grease while adding shine and light protection. Follow the appliance care manual and wipe with the grain.
Explore stainless steel protection02 / Black stainless and coated finishes
Black stainless? Start with your exact finish.
Black stainless and fingerprint-resistant appliances can carry special factory coatings. Check your model’s care guide and confirm compatibility before using either product. If it specifies mild soap and water only, follow that instruction.
Ask us about my finishHow to care for stainless steel appliances
- Check and cool. Read your model’s care guide. Work on a cool, compatible exterior surface. Test an inconspicuous area only where product use is permitted.
- Clean or coat. Use Surface Revive for routine fingerprints and light grease. For Home Ceramic Coating, first remove dirt and cleaning residue and dry completely.
- Wipe and finish. Use a clean microfiber cloth, follow the metal grain and buff evenly. For coating, allow 2 hours before use and 24 hours for full cure; keep dry during cure.
- Maintain gently. Once fully cured, refresh compatible surfaces as needed. High-touch and frequently washed areas may need earlier recoating.
Exterior care only in this guide. Do not apply to hot surfaces, cooktops, oven or microwave interiors, food-contact areas, controls, vents, seals, floors or damaged finishes. Follow each product label and the appliance manufacturer’s restrictions.